Stablepoint Knowledge Base

Get all the help you need here.

Email Settings

Posted 23rd July, 2019

Are you looking to setup your personal email address on your device? If so, this article will help you out to achieve this.

While each client is different in its layout and verbiage, there is still a basic set of information that the email client will need. Below is how to get your email settings.

Non SSL email settings

The following settings are the non Secure settings. Use this only if you cannot use the SSL settings. Otherwise, you will want to use the SSL setup. Note that you will need to change example.com to your Domain Name.

Incoming Server: mail.example.com

Outgoing Server: mail.example.com

Username: Your full e-mail address
Password: Your e-mail account password
Incoming Port: POP3 110 or IMAP 143
Outgoing Mail server (SMTP) Port: 587
SSL: NO
SMTP Authentication Required
Secure Authentication or SPA needs to be turned off

SSL email settings

Below is an example of the recommended Secure settings. The SSL (Secure Sockets Layer) protocol is for connecting to your server securely to prevent network “snoopers” from seeing your data over the network connection. Note that you will need to obtain the "Server Name" from within your personal client area https://clients.stablepoint.com/ if you click on "Hosting Accounts" and under the "Label", the server's full name will be within.

Incoming Server: "Server Name"

Outgoing Server: "Server Name"

Username: Your full e-mail address
Password: Your e-mail account password
Incoming Port: POP3 995 or IMAP 993
Outgoing Mail server (SMTP) Port: 465
SSL: YES
SMTP Authentication Required
Secure Authentication or SPA needs to be turned off

If you find yourself in a tight spot with setting this up, please feel free to get in touch with us and we'll be more than happy to assist you further with this and with any other questions.